Hall Technologies May 24, 2023
Page 6 of 13
HT-AIM-100-TX REAR PANEL
No.
Name
Description
1
POWER
DC 18V power supply. (Only one side needs to be powered.)
2
HDBT OUT
HDBaseT output, connected to the receiver input via Cat5e/6/7 cable.
3
IR IN
Connect to the IR Receiver Cable (Signal is sent to the AIM-100-RX IR OUT).
4
IR OUT
Connect to the IR Emitter Cable (Signal is received from the AIM-100-RX IN).
5
RS232
For RS-232 pass-through.
6
HDMI IN
Connect to an HDMI source.
7
ETHERNET
Connect to a LAN network.
8
MODE
Normal:
•
RS-232 signals can be transmitted as pass-through signals.
•
Transmitter cannot be updated.
Update:
•
RS-232 signals cannot be transmitted.
•
Transmitter can be updated.
