Hall Technologies June 3, 2022
Page 8 of 13
Panel Description
Front Panel
ID
Name
Description
1&2 HDMI IN 1-2
HDMI inputs 1&2. Connect to HDMI sources.
3
USB-C
USB-C input. Connect to a USB-C source.
4
RESET
Use this button to reset device.
When the transmitter is powered on, use a pointed stylus to hold
down this button for five or more seconds and then release, the
transmitter will reboot and restore to its factory defaults.
5
UPDATE
Micro USB port for firmware update or RS232 serial control.
6
HDMI LEDs
(1-2)
On:
Corresponding HDMI input signal is being transmitted.
Off:
No HDMI signal is being transmitted or signal is unstable.
7
USB-C LED
On:
Corresponding USB-C input signal is being transmitted.
Off:
No USB-C signal is being transmitted or signal is unstable.
8
HDCP LED
On:
Video signal is being transmitted.
1
2
3
4
5
6
7
8
9
10
11
12
13
14