Hall Technologies June 3, 2022
Page 4 of 13
Introduction
Overview
This product is a 3 x 1 auto switching HDBaseT 2.0 transmitter that supports long distance
transport of HDMI, USB-C and high-speed USB 2.0 signals up to 40m/131ft using a Cat
5e/6/6a/7 cable. It is 4K compatible with a max resolution of 4K@60Hz/4:2:0 8bit deep color.
The PoH feature enables the transmitter to be powered by an HDBT receiver.
The transmitter allows you to automate the display power ON by using pre-loaded RS232
commands whenever a video signal is introduced to the system. It will also turn the display
power OFF after a specified amount of time has passed when no video signal is present. It gives
you the ability to turn the display ON or OFF as well and switch from one input to another
manually using the control buttons on the transmitter panel.
This product is ideal for situations where USB must be extended alongside HDMI for display
interactivity for items such as interactive whiteboards or projectors.
Note:
The transmitter must be used with an HDBaseT 2.0 receiver (e.g., DSCV-70-RX, sold
separately) to complete the extension circuit.
Features
Two HDMI inputs, One USB-C input and one HDBT output
Transmits 4K@60Hz (YUV 4:2:0 color sub-sampling) up to 40m/131ft and 1080P@60Hz
signal up to 70m/230ft via a Cat 6a/7 cable
Transmits 4K@60Hz (YUV 4:2:0 color sub-sampling) signal up to 35m/115ft and
1080P@60Hz signal up to 60m/197ft via a Cat 5e/6 cable
Supports automatic switching
Additional analog audio input pass-through allows for audio distribution to the HDBT receiver
side
High-speed USB 2.0 pass-through over HDBT up to 70m
PoH capable – can be powered by connected receiver with PSE module
Firmware upgrade through Micro USB port