8
© Copyright 2019 Hall Research, Inc.
VERSA-4K
Getting Started
1.
Use Gigabit Switch with IGMPV2 and Jumbo Frame Support
2.
Connect Sender(s) and Receiver(s) to the switch. No DHCP server required, by
default
Auto IP
is enabled.
3.
If switch does not support PoE, use external power supply include in the
package
4.
Assign unique
Group ID
to each Sender. Group ID can be changed from the
Front Panel
using UP and DOWN arrow keys or by using IR Remote Controller
(See
Front Panel operation
for more details)
5.
Connect HDMI Source(s) to Sender(s)
6.
Connect HDMI Display(s) to Loop out as required
7.
Connect HDMI Display(s) to Receiver(s)
8.
Connect
IR Detector
cable to "IR-CTRL" port to use IR Remote Controller as
required
9.
If extending bidirectional IR, connect IR Emitter cable to "IR-OUT" port and IR
detector cable to "IR-IN" port of both Sender and Receiver. See
IR Over IP
for
more details.
10.
If Using RS-232, connect RS-232 cable from PC or automation system to the
supplied phoenix connector, and then connect it to the "RS-232" port of VERSA.
See
Serial over IP
for more details.
11.
To control the unit from WEB-GUI or PC-GUI change the IP address of PC to the
Auto IP
network
12.
Assign
Device Name
to Sender(s) and Receiver(s) from WEB-GUI or PC-GUI