10
© Copyright 2019 Hall Research, Inc.
VERSA-4K
SUBNET
Subnet Mask
GATEWAY
Gateway
BAUD
RS-232 Baud Rate
USB 2.0 (Receiver Only)
Used to the Connect/Disconnect with Sender in the
same group
Status Name
Description
MAC ADD
Mac Address of the Device
USB RX IP (Sender Only)
Shows the IP address of the Receiver to which USB is
connected
USB TX IP (Receiver Only)
Shows the IP address of the Sender to which USB
devices are exported
LINK SPEED
Ethernet Link Speed (Shows 1000M when connected to
1G network)
Shows "No Link!" when Physical Link is down or IP
address is not assigned
IR Remote Controller
IR Remote controller can be used to change the
Group ID
of Sender/Receiver. The numeric key pad
on the remote controller can be used to key-In 4 digit
Group ID (0000 to 9999). To use IR Remote
Controller, connect IR Detector Cable, which is
labeled as "Control" to "IR-CTRL" port of VERSA. See
IR Detectors and Emitters
for more information.
Fig 5: IR Remote Controller
IR Detectors and Emitters
IR Detector cable for Passthrough.
Connected to "IR-IN" port of VERSA.