UI-IP8-DP
14
© Copyright 2018 Hall Research, Inc.
Setup scheduled macros by clicking on “Edit” button either in the Repeat section or the Once
section, specify the macro to be run and add the time and day info.
The event can be set as “Active” or “Not Active”.
Click on “Save Change” to save the changes to the event.
4.8 Network Settings Tab
As shipped from the factory (or after restoring factory defaults), the UI-IP8-DP IP address is
set for static IP address 192.168.1.50.
Network Settings
If changes are made, make sure to hit the Save button and then go to System Settings tab
and reboot the system for the new IP parameters to take effect.
Note that IP changes can also be made from the HRDF PC GUI.
Clicking NetWork Reset button sets the IP address to a static 192.168.1.50 and reboots the
unit.
