Hall Research
714.641.6607
Page 4
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
i
i
n
n
g
g
t
t
h
h
e
e
D
D
i
i
s
s
p
p
l
l
a
a
y
y
P
P
o
o
w
w
e
e
r
r
The wall plate can be used to
control the display on/off function
(Power
Command). The wall plate can store and send RS232 control commands to
displays or projectors with RS232 control capability. The wall plate can
extend IR signals, by pointing IR remote to the wall plate and connecting
an IR emitter to the Receiver, however the wall plate also has limited
capability to generate user defined IR commands and some popular IR
protocols are supported. Since there are thousands of IR commands and
dozens of protocols, it may be difficult for the user to obtain all the
information necessary for IR control. Using programmed IR commands is
further complicated because to keep the power state of the wall plate
synchronized with the TV, unique IR commands for ON and OFF are
needed. Many TVs only have one IR command that toggles the state
between on and off, making programmed IR control unsuitable.
To configure the wall plate and enter RS232 power commands for your
display, the wall plate provides a mini-USB connector (on the bottom side)
and is shipped with a USB cable that can be connected to any Windows
®
PC. A free Windows
®
GUI software is available on the product's webpage.
It is the user’s responsibly to determine, for their specific display, the
control method and to obtain the commands from the display
manufacturer.
As mentioned earlier for best results use a display or a projector with an
RS232 control port if you desire the wall plate to control its power.
Supports MHL with charging feature
