Video to PC/HDTV Switching Scaler
5
2. Installation
2.1 Connecting the Video inputs
The video scaler can accept a both TV and PC inputs and scale them to
your desired high resolution format output. The TV inputs are
composite video (BNC connector), S-Video (Mini-Din connector), and
an YPbPr input (3 BNC connectors). BNC to RCA adapters are
included for composite and component inputs. Both standard definition
TV (SD) and High Definition (HDTV) are supported. The unit also
provides a PC input that is also scaled for the output (note that PC
input can also be directly bypassed to the output without scaling if
desired). Refer to Figure 2.1 for a block diagram.
Rear Panel
S-Video:
Use an S-Video cable to connect the S-Video output of the
source video equipment to the connector labeled “S-Video” on the
back of the Video Scaler. The format can be NTSC, PAL, or SECAM.
Composite Video:
Use a Composite video cable to connect the
composite video output of the source equipment to the connector
labeled “Video” on the back of the Video Scaler. The format can be
NTSC, PAL, or SECAM.
YPbPr input:
Use a 3 RCA-to-3 BNC YPbPr cable to connect the
YPbPr output of the source video equipment to the device. The format
can be NTSC, PAL, or SECAM.
Computer RGB with H&V Sync:
Connect the source computer's
VGA output signal to the HD 15 connector labeled “PC In” on the
Video Scaler.
