Hall Research Technologies HHD264 Скачать руководство пользователя страница 3

Страница: 3 / 3

Pg 3



Open the Windows GUI and scan the network. Double click on the device you found and
change its IP to a required static IP.



Make sure you allow access to the Windows GUI through the Firewall when you launch
it for the first time.

(Refer HHD-264 FAQs for more info)



Connect another HHD264 and repeat the process, until you have changed all the devices
to static addresses.

For more information, please refer

Содержание HHD264

Страница 1: ...nd receiver RX using a CAT 5e 6 cable and make sure they are in the same group Many to Many Requires a Gigabit IGMP Network Switch Example of Matrix setup many sources to many displays If the Switch S...

Страница 2: ...receiver RX to a display and know the IP address from the OSD displayed To know the sender s IP connect it to the RX using a CAT5e 6 cable directly without using a switch Know the sender s IP address...

Страница 3: ...ts IP to a required static IP Make sure you allow access to the Windows GUI through the Firewall when you launch it for the first time Refer HHD 264 FAQs for more info Connect another HHD264 and repea...