Hall Research Technologies Genesis Series, Руководство пользователя

Страница: 32 / 48

30
Hall Research Technologies, Inc.
3.2.12 Real Time Clock Functions
3.2.12.1 To read or set date & time:
Command:
DS<cr>
stands for Date Set
Response:
Friday 09/18/08 12:27:15pm
Enter the year (00-99)
:
Hit Enter if you want to keep previous value; hit Esc to exit
Enter the month (01-12):
Enter the date (01-31):
Enter the day of the week (1=Sun – 7=Sat):
Enter the hour (1-12):
Enter the minute (00-59):
Enter the second (00-59):
Enter AM/PM (0-1):
Notes
: You have 16 seconds to make your selection, or the command is automatically
cancelled. To skip the current prompt without making a change, press ENTER.
Cancelled <cr> ( if ESC or an invalid value was entered)
3.2.12.2 Scheduling Auto recall of Preset Patterns
The matrix provides up to 4 specific times throughout the day where any preset
patterns (0 to 16) can be recalled. You can set a schedule that is the same every
day (daily) or is different for weekdays and weekends. Presets 1 to 16 are those
saved by the user, and preset 0 disconnects all video and audio outputs
Notes on Scheduling Presets
When defining a schedule, to skip the current prompt without making a change,
press ENTER. Press ESC to exit the schedule setting at any time. Timer values
should be entered in the proper order meaning that Timer1 should occur prior to
Timer2, Timer2 should occur prior to Timer3, and etc. Timers will be disabled if
hour, minute, and AM/PM are set to 0. So if for example, your schedule only has
to set the pattern once in the morning, leave the data for timers 2 through 4 at
zero and only enter values for timer 1. If Timer values are not set properly (in
ascending order), an error message will be prompted