Halex Electronic Dartboard _ 6
Electronic Dartboard Operation
1. Press the
POWER
switch to activate dartboard. A short musical introduction is played
as the display goes through power-up test.
2. Press
GAME
button until desired game is displayed (see Game Menu on
page 23).
3. Press
DOUBLE button
(optional)
to select starting and/or ending on doubles or
Master Out (used only in 301 - 901 games). This is explained in the game rules
section.
4. Press
PLAYER
button to select the number of players (1, 2, ... 8). The
default setting is 2 players.
5. Press
START/HOLD
button (red) to activate game and begin play.
6. Throw darts
•
The dart indicator display is located above the numbers in the LED displays.
The lights indicate the number of darts thrown in the round.
•
When all 3 darts have been thrown, a voice command will indicate
“
Remove Darts
” and the score will flash. The darts can now be removed
without affecting the electronic scoring. When all darts are removed from
the playing surface press the
START
button to go to next player. Voice
command will indicate which player is up. Also, the player indicator lights
will illuminate to show which player’s turn it is.
Display Protective Film
This electronic dartboard may have a clear film over the entire display area and over the
button area to prevent scratching during shipping. It is recommended that you remove this
film so display is easier to read. To remove, simply lift edge, peel off, and discard.
Game Guard Feature
After the
START
button has been pressed and play has begun, the GAME GUARD feature
can be activated. When the button is pressed, all of the keys will ‘lock’. When Game
Guard is active, a misguided dart hitting a button will not affecting your game. To
deactivate the Game Guard, simply press the button again and the keys will unlock.
