User Manual
ORLocate™
Packing System
© 2010
Haldor Advanced Technologies Ltd
.
P0037 Rev.0
Page 19 out of 28
Figure 19
Items that were registered as defected (i.e. were scanned in the maintenance pop-up) cannot be
packed until a system administrator scans the item as repaired in the
ORLocate Management
system.
4.3.
Replace set tag
: when the set tag has exceeded its usage period (defined by the number of
times the set was packed with that tag), the tag should be replaced. The system will show an
alert (see figure 20 below) right after the set tag is scanned.
Take the current set tag and discard
. Take a new set tag and attach to the metal ring and to the
set tray. Scan it in the Tool Pack Antenna and continue packing.
Figure 20
5.
Register untagged item
Items that have no RFID tag should be registered manually in the system. These items are marked
with a yellow line in the inventory list as shown in figure 21 below:
Figure
21
To register these items, touch the name of the item (anywhere on that row) and a pop-up will
appear as shown in figure 22 below.
Insert the number of items that are being packed into the set by using the numeric keypad
