Halcyon Explorer Скачать руководство пользователя страница 25

25

promote life-limiting phenomena such as creep leakage. If you have over-
discharged your NiMH battery pack, recondition the battery by taking it 
through at least three complete discharge/charge cycles. 

Can I disassemble my Explorer/Apollo battery pack or dry lid?

If you remove the protective Delrin caps, the plastic shrink-wrapping 
from your NiMH battery pack, or disassemble the Halcyon dry lid, you 
will void your Halcyon warranty. There are no user-serviceable parts 
within the pack; if you think that your battery pack or lid might be 
damaged, please return the light to your Halcyon dealer for inspection. 
The bolts that secure the dry lid are sealed; breaking the seal will void 
your light's warranty.

Warning: Your Halcyon Explorer battery pack and dry lid are built 

to exacting standards. There are no user servicable parts in either 
component; removing the pack's end cap or disassembling the lid can 
damage the system's wiring and result in a catastrophic failure. 

Do I need to take any special precautions in shipping and handling my 

Explorer battery?

Shipping and handling of NiMH batteries is straightforward. The 
following suggestions ensure maximum performance, reliability and 
safety in working with the cells:

•Provide proper packaging, considering the weight of the battery 

pack, to avoid transit damage. 

•Do not store cells or batteries under load or in a shorted condition.
•Avoid excessive handling of charged cells and batteries outside the 

Explorer canister.

p

!

Содержание Explorer





























Отзывы: