
Remote Control
Operating the Remote
After inserting the batteries, you will be prompted by
the main page, which shows all the devices and
functions for selection.
Tap
HOME at any time to jump to this page. If
remote is inactive for approximately 60 seconds, it
will go to sleep mode and shut down the display.
Simply touch the screen panel to activate the unit.
(Note: When in sleep mode, the hard key section is
still available for command)
Tap any device icon on screen to enter
corresponding device mode. The LCD shows a
remote key platform
Tap a key directly to send out corresponding infra-
red command
Tap
PAGE
at bottom of screen to change
command pages
Tap
HOME to return to main page
There will be no label or symbol for an empty key
(Note: these keys are available for learning, please
refer to learning section of this manual for details.)
Tap
MENU to set up the unit
Panel Calibration
Please follow the below instruction for calibration of
the Halcro Logic UTSR1. If you experience any
incorrect response from the touch screen, please re-
calibrate the unit.
Tap
MENU to set up the unit
Tap REMOTE SETTING
Tap CALIBRATION
Follow the described procedure from the screen
display
Tap BACK to go back to the HOME page
Содержание UTSR1
Страница 1: ...Owner s Manual Universal Touch Screen Remote UTSR1 Docking Station...
Страница 43: ...43...
Страница 44: ...Rev 1 1...