
7
Battery Installation and Charging
Your Halcro Logic UTSR1 is supplied with 4 x AAA
NiMH rechargeable batteries, a connector and a
charging adaptor. We recommend you charge your
batteries over night (10 hours) before 1
st
time use.
The battery meter
(top-left corner of LCD) will
empty
to indicate when the batteries require
recharging.
To install the batteries, open the battery cover; follow
the polarity symbol shown in battery compartment,
place the batteries inside and then replace the cover.
To recharge batteries, put the power adaptor into AC
wall outlet, insert the DC jack to the connector, then
connect to the socket at the bottom of the remote. It
takes approximately 14 to 16 hours to fully charge the
batteries.
Note: The Battery icon
is not shown when in
Menu mode.
The unit is designed for optimum operation with
original batteries.
Do NOT connect charging adaptor and connector
when using the non-original batteries.
To avoid data loss, Do NOT attempt remote setup
when batteries are weak.
Содержание UTSR1
Страница 1: ...Owner s Manual Universal Touch Screen Remote UTSR1 Docking Station...
Страница 43: ...43...
Страница 44: ...Rev 1 1...