Page 10 of 26
TM
dm8
7. Volume control:
Turn this knob
clockwise to increase the volume and
counter-clockwise to decrease the
volume. To mute the system, when the
speakers are balanced, continue to turn
the knob counter-clockwise until the
word MUTE
appears on the display, or
press the Mute button (Fig 1, 4)
8 Phase Button:
Depressing this button
will toggle the unit between in-phase and
out-of-phase mode.
9 Remote sensor window
: Behind this
window is a sensor that receives infrared
signals from the remote control. Aim the
remote at this area and do not block or
cover this sensor window.
Remote Control
1. Volume buttons
2. Mute button
3. Standby/On button
4. Signal Source buttons
5. Function button
1. Volume buttons
: For
volume control and also
used in conjunction with
the function button for
various function selections.
2. Mute button
: Press to
Mute the sound, press
again to reactivate the
sound.
3. Standby/On button
:
Press to toggle the system
between Standby and On.
4. Signal source buttons
:
Press to select any one of 5
signal sources on the dm8.
5. Function button
: Press
to choose the following
functions: speaker balance,
in and out of phase and to
toggle the system between
stereo and mono. See
relevant operating
instructions for full details.
Figure 2
Note: Remote control takes 3 x AAA batteries (supplied)