Page 28 of 33
V1.1
5. Warranty
Hal Technology provides a one-year limited warranty of the Model HPC601 Handheld
Particle Counter, but not including the necessary calibration service.
•
Warranty begins from the shipping date.
•
The user is responsible for the cost of shipping if any service or repair is required.
•
The warranty is limited to the HPC601 instrument and HAL TECHNOLOGY does
not extend this liability to accessories or any other equipment damage, body injury,
and loss of properties due to abnormal use.
•
The following are not included in the warranty:
•
Improper connection to a power source, resulting in damage of the instrument.
•
Any physical damage due to mechanical forces (e.g., collision or dropping) that
may cause any damage of the front panel, LCD screen, switch and internal
components, etc.
•
Unauthorized opening of the instrument.
•
Damage due to operation in an un-specified environmental condition.
•
Abnormal operation due to required instrument calibration.
Limitation of Warranty
A. Hal Technology warrants that all equipment shall be free from defects in material and
workmanship under normal use for a period of one year from the date of shipment to
Buyer except that Hal Technology does not warrant that operation of the software will be
completely uninterrupted or error free or that all program errors will be corrected. Buyer
shall be responsible for determining that the equipment is suitable for Buyer’s use and
that such use complies with any applicable local, state, or federal law. Provided that
Buyer notifies Hal Technology in writing of any claimed defect in the equipment
immediately upon discovery and any such equipment is returned to the original shipping
point, transportation charges prepaid, within one year from date of shipment to Buyer
and upon examination Hal Technology determines to its satisfaction that such equipment
is defective in material or workmanship, i.e. contains a defect arising out of the
