Page 23 of 33
V1.1
affect the alarm.
Print/Save Options:
A Bluetooth enabled printer is required for printing; contact Hal Tech for a quote. The
Print option can be set to either ON or OFF. When set to ON, the unit will print results
after a measurement based on the setting of the Save option. If the save option is set
to ON or OFF and the print option is ON, then every measurement will be printed. If
the save option is set to Average and the print option is on, only the average
measurement will be printed at the end of the measurement process.
The save option can be set to one of three options: ON, OFF, and Average. If set to
Off, no data is saved. If set to On, every sample is saved. If set to Average, only the
average of all the measurements is saved.
•
The optional Bluetooth printer is required to print. If you would like to purchase
the printer, contact Hal Technology (
Bluetooth Settings:
The Bluetooth settings are for the optional Bluetooth enabled printer, which would be
included with the HPC301 if purchased. If you do not use the printing feature of this
unit, be sure to set the Bluetooth Power option to OFF. This will decrease the drain
on the battery. The Address option can be modified, and will correspond to the 6-byte
(48-bit) Bluetooth address of the printer. If the printer was purchased from Hal
Technology when the HPC301 was ordered, the printer will already be configured.
Selecting Connect and pressing the
ENTER
key will test the Bluetooth connection
between the module and the printer. Be sure that the printer is turned on before
attempting the Connect test.
Factory Settings:
The firmware update option is reserved for future use by Hal Technology, and the
