96
05-7182-01.fm
Maintenance and Servicing
5.9.9
Changing the side brush
Inspect the side brushes once per week and replace if wear is present.
1. Switch off the machine and remove the dirt hopper
Fig. 57-A
.
2. Remove both M6x16 flanged button head bolts, the brush adjuster and the
cover
Fig. 57-B
.
3. Remove the round belt from the side brush
.
4. Loosen the three screws
of the side brush and remove it.
5. Fit the new side brush in the reverse order. Pay attention to the run of the
belt
.
5.9.10
Adjusting the sweeping level
The sweeping level must be readjusted if the event of brush wear and after
replacing the side brush.
1. Turn off the machine.
2. Rotate the adjusting wheel until half of the side brush is touching the floor.
Compared to a clock, the sweeping level must be from approx. 9 o’clock to
3 o’clock on the floor
Fig. 57-F.
A
B
C
D
Fig. 57:
9:00
3:00
E
F