03-7155-00.fm
29
Operation
5. Add detergent to the tank according to the manufacturer’s regulations.
The filling opening cap
acts as a dosing aid.
Fill the cap twice up to the mark with detergent (250 ml), corresponds to
a dosing of 1:100 in a fully filled solution tank (see table). Fill the solution
tank with fresh water up to the maximum filling level.
3.3
Cleaning
1. Tilt the machine forwards from the park position.
2. Put the machine into operating mode with the ON/OFF button on the control
panel.
3. Use the starting handle to switch on the cleaning functions.
4. Adjust the fresh water quantity with the button on the control panel.
5. Push the machine forwards.
The power flow of the brush unit drive supports the propulsion.
3.4
Turning off the machine
1. To suck up any residual water before turning off the machine, the water
supply can be switched off with the
fresh water dosing
button.
2. Let go of the starting handle. The cleaning functions are switched off. The
vacuum system then runs for another 5 seconds to suck up any residual
moisture.
3. Turn off the machine with the ON/OFF button.
