before commencing a cleaning or
servicing job on the machine, make
sure engine does not run and key is
removed;
Only stop the engine from a high
speed range in case of malfunctions
and only after the suction turbine
has been turned off.
use appropriate tools for servicing,
maintenance and adjusting work;
as far as aspects of safety are con-
cerned, spares will have to be at
least of the same quality as genuine
parts;
when working under the lifted hop-
per, this item has to be secured with
a jackbar; make sure hopper jak-
kbar is installed;
in compliance with para. 57 BGV
D29, the Hako-Citymaster 1800 TDI
has to be serviced in regular inter-
vals and inspected for safe condi-
tion not less than once a year;
before commencing any work on
the electric system, disconnect bat-
tery (negative lead);
never use open flames when hand-
ling batteries, in particular when
checking the electrolyte level;
chargerooms should be adequately
ventilated.
spilled (straight) battery acid must
not get into the sewer before having
been neutralized. Comply with regu-
lations imposed by law and local
regulations;
never run the Hako-Citymaster
1800 TDI in absence of proper safe-
ty installations;
a second person may be transport-
ed only if machine is equipped with
a second seat; transport of other
persons is not admitted;
do not exceed the admissible
weight and admissible axle load
limits (even with reduced loading);
the implements have to be attached
at the indicated points;
use of a mobile phone will require to
stop machine; an external an-tenna
is mandatory;
before remedying a clogged suction
hose, turn the engine off and wait
until the suction turbine stands still.
Replace illegible or missing warning
and instruction labels.
Caution!
To avoid contusion hazard
maintain adequate safety clearance
when lifting and lowering the hop-
per;
before commencing work, the ope-
rator has to make sure the machine
and its accessories are in proper
and safe condition. Machines with
known defects must not be used;
the machine my be started and
stopped by the driver seated only;
before starting engine, stop all drive
systems.
avoid filling fuel tanks while engine
is running; do not smoke or handle
open flames when filling fuel tanks
or working in the vicinity of the fuel
system
a good approach to prevention of
accidents is proper maintenance of
the machine;
46
