When cleaning or servicing the machi-
ne, or replacing parts, have the engine
stopped and the key removed. Use
appropriate tools for service, repair
and adjusting work. As far as aspects
of safety are concerned, spares at
least need to be of the same quality
as genuine parts.
Fluids (fuel, hydraulic oil) leaking
under high pressure, may penetrate
your skin and cause serious injuries.
If high-pressure fluids caused injuries,
see a doctor immediately; otherwise
serious infections may be caused.
Depressurize systems before discon-
necting lines. Before pressurizing the
system is again, make sure all con-
nections and fittings are tight and the
lines are in good shape. It will be hard
to detect hydraulic oil escaping
through a small orifice; use a piece of
cardboard or wood when searching for
leaks.
Collect oils and fuels and dispose pur-
suant to regulations imposed by law!
Do not remove or install tires, or repair
a rim. Take wheels with defective tires
to a specialized repair shop.
Caution:
Jack vehicle and provide for
safe support
Maintenance Work
Performing maintenance work as
recommended will make sure to work
with a dependable machine at all
times.
It is better to take precautions than
repairing damage, and it saves money!
Please get in touch with your local
Hako-distributor if you cannot do
the job in-house; he will be glad to
have this work done for you. Service
contracts are available either. For
questions and parts orders always
have your machine's chassis & engine
serial number on hand. The data plate
is located on the right forward end
of the chassis, behind the cabin (lift
hopper). The engine serial number
(engine code plus serial) is embossed
on the left side of the cylinder head.
75
Before commencing any work on the
electric system, always disconnect
negative battery lead.
Pursuant to para. 57 VBG D 29, the
Hakomatic 1800 TDI road sweeper
has to be inspected by an authorized
expert for safe condition as required,
but not less than once a year. Such
inspection includes roadworthy condi-
tion and operational safety either.
Roadworthy condition also may be
confirmed by an expert's opionon IAW
StVZO also. Results of such inspec-
tion have to be kept on file at least
until next inspection is performed. For
more details please address your local
Hako distributor. He will draw-up a
proposal for this inspection imposed
by law. If the Hako-Citymaster
1800 TDI has to bear a license plate,
para. 29 StVZO calls for an annual
inspection (this period of time being
extends to 24 months for vehicles with
a max. admissible weight of more than
3.5 tons).
