HAKO 1139.39 Скачать руководство пользователя страница 5

5

Safety information

1.2

General notes

• Apart from the instructions in this op-

erating manual, the general safety 
and accident prevention regulations 
of the legislation must be taken into 
account.

• Before the machine is put into ser-

vice, please read carefully the oper-
ating manual you receive as well as 
further separate instructions for addi-
tional implements or attachments 
and observe them in all aspects in 
your work.

• The device may be used, maintained 

and repaired only by persons who 
have been instructed by Hako ex-
perts.

• You should pay special attention to 

the safety instructions. For errors in 
operating the device can be avoided 
and its trouble-free operation can be 
guaranteed only with precise factual 
knowledge.

• The operating manual must be avail-

able constantly at the place of use of 
the device and should therefore be 
kept carefully on the device.

• Please hand over these documents 

to the new owner/operator on sale or 
rental of the device. Have the hand-

over confirmed!

• Spare parts must correspond to the 

original parts with regard to safety.

1.3

Operating instructions

• Check the device for operating safe-

ty before every start-up! Remove 
faults immediately!

• Before starting work, the operator 

must familiarize himself with all 
equipment, operating and actuating 
elements as well as with their func-
tion. It is too late to do this during op-
eration!

• Personal protective equipment must 

be worn when working with the 
Citymaster 1600.

• Do not direct the jet of the Citymaster 

1600 onto yourself or other persons 
to clean clothes or footwear.

• If an extension hose is used, the plug 

and coupling must be water-tight.

• Use the high-pressure lance only 

when standing on a firm surface, e.g. 
not on ladders or from the cab.

• The maximum operating pressure 

set by the manufacturer may not be 
increased.

• When taking out of service, relieve 

the pressure of parts under pressure 

(hoses, etc.)

• Work only with the machine at stand-

still and the parking brake applied.

1.4

Maintenance instructions

• Daily and weekly maintenance work 

must be done by the operating staff. 
In all other maintenance work, 
please contact your nearest Hako 
service centre.

• The maintenance work and mainte-

nance intervals specified in the oper-
ating manual must be complied with.

• Use suitable tools for the cleaning 

and maintenance work.

• Have the device checked for safe 

condition by an expert in accordance 
with the accident prevention regula-
tions at appropriate intervals (we 
recommend at least once yearly).

• Spare parts must at least comply 

with the technical requirements 
specified by the manufacturer.This is 
guaranteed by original spare parts.

• Switch the device off for cleaning 

and maintaining the machine as well 
as before replacing parts.

• Cleaning the machine with a high-

pressure cleaner or steam jet is not 
allowed.

Содержание 1139.39



















Отзывы: