14
High-pressure cleaner
2.3.2
Working with the high-pres-
sure cleaner
1. Open the rear flap of the dirt hopper.
2. Remove the pressure hose (Fig. 8/1)
from the hose holder and plug it into
the connection (Fig. 8/2).
3. Set the changeover valve (Fig. 8/3)
to the high-pressure cleaner posi-
tion.
- Position I: Sweeping hydraulics
- Position II: High-pressure cleaner
hydraulics
4. Open the fresh water supply
(Fig. 8/4).
5. Select the working menu in the mul-
tifunctional display with the turn-
push knob (Fig. 8/5) and set the
speed for the high-pressure cleaner
in the suction fan menu item
(Fig. 8/6)
6. The pressure controller (Fig. 8/7) is
preset to 120 bar.
7. Clean the surface with the lance
(Fig. 8/8).
8. Set the changeover valve back to the
suction fan position and close the
fresh water supply. After cleaning,
relieve the lance and pressure hose
of pressure and stow them in the
stowage (Fig. 8/9).
Fig.8
1
2
3
I
II
4
7
9
9
5
8
5
6