Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
To help you know more about our product, we have provided installation and operating instructions and other
information on labels in this guide
. Please read the instructions carefully so that to be familiar with the
correct operation and some general security measures.
This information alerts you to potential hazards
that could hurt you or others. Please check and regular inspect the equipment, comply with the safety
regulations seriously, in case of the occurrence of dangerous accidents. This guide identifies potential hazards
and has important safety messages that help you and others avoid personal injury or death.
WARNING
and
CAUTION
are signal words that identify the level of hazard.
PRODUCT INTRODUCTION
VANOS450
– 230 V / 50 Hz Electric wire hoist with a remote control
This is a powerful lifting and pulling tool which is widely used in mechanical, building, automobile, agriculture
and other fields. Equipped with speed switches and current overload protection function. Powered by AC power
source, this compact tool has a pulling capacity of 450 kg.
There are two kinds of operation mode:
1. Manual mode
— Touch the switch by manual button, apply for pulling.
2. Remote control mode
— Operated by remote control, apply for narrow and high position.
1. Change-over Start Switch
2. Load Indicator Display
3. Fairlead
4. Safety Hook with Hook Strap
5. On / Off Switch
Specifications data for the product:
Max Pulling Capacity
450 kg
Wire Rope Diameter/Length
0,58 cm / 4,6 m (usable length 3,4 m)
Power Source
230 V / 50 Hz AC
Power Input
1200 W
