Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
5.2.5 Continuous rating
Never use the winch beyond the 20 minutes permitted per hour.
The life of the winch depends on the conditions of the load and working frequency. During long operating
periods make sure to use the winch within its continuous rating.
Continuous rating means the amount of allowable usage within one hour which is 25% or 15 minutes per hour
or 300 starts per hour. The maximum number of starts means the number of times the motor starts within the
hour.
6. OPERATION
6.1 Control device: Control panel
6.2 Operating procedure
The person who is untrained or unfamiliar with the operation procedure is prohibited from operating machine.
Preparation before working
▪
Check all safety and environmental conditions
▪
Ensure there are a minimum of five (5) wraps of wire wound around the drum
▪
Check the wire rope and discard should there be any signs of excessive wear, too many broken wires,
corrosion, or other defects.
▪
One wire rope consists of 7 strands. One strand has 19 wires. So one of the 7 strands must not have
more than 3 of the 19, damaged wires.
▪
Connect the main power source and ensure grounding.
▪
Do not lift loads exceeding the rated load.
▪
Always use power source at the rated voltage.
