Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
4
.
Testing the hand pallet truck
4.1 After the truck is assembled, try to rock the hand grip and
operate different positions of the control handle knob (10) to
examine the lifting, free position and dropping and check that
whether the different positions are normal or not. See fig. 5.
4.2 The screw (9) in fig. 4 is used to adjust the truck operation. If
the truck body drops immediately after it is lifted, you should turn
the screw (9) a little counterclockwise and then try to operate the
truck again until the truck body will lift normally. If the truck body
cannot be lowered after it is lifted, you should turn the screw (9)
a little clockwise and then try to operate the truck again until the
truck body can drop normally. The external hexagon nut (8) at
the screw (9) plays the locking function in the truck. So you
should loosen the external hexagon nut (8) before adjustment
and tighten the nut (8) after finishing the adjustment.
