Haklift HAVA1500ELEC, Руководство по эксплуатации, Страница: 31 / 53

30
(SEMI-ELECTRIC)
1. Handle (Picture No. 1), match the holes of handle
and hydraulic system.
2. Handle pins (Picture No. 2), the spring safety pin
should be well rested in the holes situated on
each side of the pump housing.
3. Chain (Picture No. 4) chain should be passed
through the middle side hole of the handle pin
and connected with the pump housing.
4. After above steps, pull the handle down to lowest
position, remove the fixed spring safety pin (Picture
No. 3) carefully to complete handle installing.
5. Handle assembly wire Harness installing: wire
harness pass through hand tube, the wire harness
twine method should be same as the above
pictures.
WRONG WIRE HARNESS TWINE METHOD
1. Wire harness passes outside hydraulic unit.
2. Wire harness passes outside handle
.