Haklift HAVA1500ELEC, Руководство по эксплуатации, Страница: 30 / 53

29
(FULL ELECTRIC)
1. Handle numbers correspond to chassis numbers.
2. Disconnect the battery.
3. Remove handle shaft (item 2) from Handle
socket.
4. Put the chassis connector through wire supporting
plate (item 5) and lock hole.
5. Install handle assembly (item 1) to handle socket.
Be careful to avoid damaging the wire harness.
6. Install handle shaft through the handle assembly
ad handle socket. Install spring pin (item 3) to
left side of handle shaft.
7. Press down on the handle assembly and remove
spring holder (item 4).
8. Connect and lock the wire harness from handle
assembly to chassis connector.
9. Fix wire harness to wire holder (item 6).
10. Reconnect the battery.