background image

7

6.  SETTING PARAMETERS

To make this product more convenient to use, the HAKKO FT-802 has the following parameters 

which can be set. The parameter settings can be changed to suit your use environment.

 

Password setting

Setting a password allows you to lock the settings 

for the output values and parameter values.

 

High output setting*

The high output function for the blade output can 

be enabled or disabled.

 

Output upper limit setting*

An upper limit for the blade output can be set to 

prevent the output from being set above the limit 

value.

* When stripping is difficult by wire diameter and 

composition, use a high output mode.

 

Auto sleep enable/disable setting

The auto sleep function can be enabled or disabled.

 

Auto sleep time setting

Auto sleep saves the set output by approx. 50% 

and reduces the blade temperature to conserve 

power consumption.

 

Auto shutoff enable/disable setting

The auto shut-off function can be enabled or 

disabled.

 

Auto shutoff time setting

After the set time has elapsed, the output will be 

switched off and the unit will enter standby mode.

or

or

or

or

or

: Disabled

: Disabled

: Enabled

min

: Enabled

min

: Partially 

   enabled

: Disabled

: Enabled

or

: Disabled

: Enabled

: Time until 

   effective

: Time until

   effective

: Disabled

: Enabled

: Enabled

(3 digit)

*1. “High output setting” and  “Output upper limit setting” are displayed when “1” or “2” is selected in “Password setting”.

*2. “Auto sleep time setting” is displayed when “1” is selected in “Auto sleep enable/disable setting”.

*3. “Auto shutoff time setting” is displayed when “1” is selected in “Auto shutoff enable/disable setting”.

Parameter

number

LED display

Set details

Initial value

Settable in 5% intervals

Password 

setting

Output upper 

limit setting*

1

Auto sleep 

enable/disable 

setting

Auto shutoff 

enable/disable 

setting

Auto shutoff time 

setting*

3

Auto sleep time 

setting*

2

High output 

setting*

1

6-1 Parameter setting table

Содержание FT802-03

















Отзывы: