1
1. PACKING LIST
Mini parallel remover handpiece ............
1
Tips (T9-I) 2pcs/set ................................
1
Heat resistant pad
..................................
1
Cleaning sponge
.....................................
1
Heat resistant pad
Iron holder
Mini parallel remover handpiece
Tip (shape-I)
Component bed
Connecting cable
Cleaning
sponge
l
Applicable Models
In order to function, the FM-2023 must be connected to the HAKKO FM-202 or FM-206
station.
2. SPECIFICATIONS
MODEL FM-2023 Mini Parallel Remover
Power consumption
Temperature range
Tip to ground resistance
Tip to ground potential
Cord assembly
Length (w/o cord)
Weight (w/o cord)
Standard tip
140W (24 V)
200 – 400°C
< 2
Ω
< 2mV
1.2m
75mm (w/o tip)
32g (Handpiece only), 5g (I tip only)
T9-I (Shape-I)
∗
This product is protected against electrostatic discharge.
∗
Specifications and design are subject to change without notice.
Tip ID number key ..................................
1
Holder clip (w/screw) ..............................
1
Component bed ......................................
1
CAUTION:
This product includes such features as electrically conductive plastic parts and grounding of the
handpiece and station as measures to protect the device to be soldered from the effects of static
electricity. Be sure to observe the following instructions:
1. The handle and other plastic parts are not insulators, they are conductors. When replacing parts
or repairing, take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
