Hakko Electronics 373, Инструкция по эксплуатации

Страница: 8 / 15

7
Operation
Usage of Iron Holder
If you use HAKKO 926, refer to the following figure to set the
iron holder. (As for the HAKKO 926, the setting is available
only on it’s left.)
• HAKKO 926
• HAKKO 631 Simply replace the iron holder if you use with iron holder
HAKKO 631 for except HAKKO 926.
• HAKKO 907, 908 Place the soldering iron in the iron holder so that the right
side of the guide pipe holder fits to the right side of the iron
receptacle.
When you want to fit it to the left side of the iron receptacle,
remove the securing nut for the guide pipe and the
connection; then reattach them in the opposite side.
Iron Receptacle
Spring Iron Holder
or
Holder Mounting Base
Thumb screw
Set the iron receptacle in the spring iron holder keeping the
iron tip and the guide pipe horizontally.