5 / 19
HakkiFeed 422 rev. A
Translated
Version 1-2019
2.4.
Main components of the machine
The HakkiFeed 422 log rack is an accessory for the Hakki Pilke firewood processor. It is controlled hydraulically
with the operating levers of the Hakki Pilke firewood processor’s control unit.
A. In-feed conveyor
B. Log table
C. Feeder
Figure 2. Main components of the machine
3.
Control functions and setting up the machine
3.1.
Arranging the machine for operation and transport
Before arranging the machine for operation and using it, ensure that the operating conditions, detailed in
Section 1.4, are met and review the safety instructions in Section 1.5.
When preparing the rack for operation, ensure that it is positioned on an even and firm foundation so that the
logs on the rack are straight. Ensure that the rack cannot move or slide on its foundation during use. Make
sure that the machine’s hydraulic hoses cannot be caught between moving parts or cause a hazard.
When arranging the rack for transport, clear any wood off of it and fix the hydraulic hoses to it with cable ties,
for example.
Note! Inspect and clean the machine before arranging it for transport.
3.1.1.
Adjustments
Adjust the height of the rack according to the firewood processor model in such a way that the rack’s in-feed
conveyor A is at least 20 mm higher than the machine’s in-feed belt. Adjust the distance between the machine
and rack to ensure the safe transfer of logs to the machine. The maximum allowed distance between the rack
and the machine’s in-feed arrangement is 500 mm.
