hajdu HB200C, Инструкция по установке, использованию и обслуживанию

Страница: 69 / 313

_________________________________ ___EN__________________________________22
 Press the ‘ DISINFECT ’ button, and the ‘ ’ icon will flash.
 Press the ‘ ENTER ’ button to confirm the manual start of the Anti-legionella
function. Then the heat pump heats the water in the tank up to 65°C, thereby
destroying any Legionella bacteria infection possibly present in the tank.
 While the temperature of the hot water in the tank exceeds 65°C, the ‘ ’ icon
flashes.
Anti-legionella function timer
 Press and hold down the ‘ DISINFECT ’ button for 3 seconds to navigate to the
timer function and display the clock setting option. While the function is being
set up, the ‘ ’ icon continuously flashes and the display shows the
‘ ’ function, as well as a slowly flashing time setting display.
 By pressing the ‘DOWN’ or ‘ UP’ arrow set the time when you want to activate
the function.
 To confirm the clock setting, press the ‘ CLOCK ’ button. Then the minute
setting will flash similarly to the hour setting before.
 Set the minutes on the clock by pressing the ‘DOWN’ or ‘UP’ arrow.
 Confirm the setting by pressing the ‘ ENTER ’ button. Thereby, you can activate
the function and quit the setting menu.
Remark:
The appliance will enable the anti-legionella function automatically at the time
set on every 7th day.
If you fail to set a time for this function, the automatic Anti-legionella protection
will turn on by itself at 23.00 every 7th day.
If the appliance is turned off or the program "Anti-leginella" is being run, pressing
the ‘ DISINFECT ’ button will make the ‘ ’ icon show up.