Haivision MB6 Скачать руководство пользователя страница 5

Antistatic Precautions

MB6 and MB21 Multichannel Chassis Installation Guide, v2.0, Issue 01

5

Safety instructions for Class A for CISPR22

Warning: 

This product is a Class A product. In a domestic environment, this product may cause radio 

interference, in which case the user may need to take appropriate measures.

Consigne de sécurité relative à la Classe A pour CISPR22

Attention: 

Il s'agit d'un produit de Classe A. Dans un environnement domestique, ce produit peut 

entraîner des perturbations radioélectriques, auquel cas l'utilisateur devra éventuellement prendre des 
mesures adéquates.

Antistatic Precautions

Electrostatic discharge (ESD) results from the buildup of static electricity and can cause computer 
components to fail. Electrostatic discharge occurs when a person whose body contains a static buildup 
touches a computer component.

This equipment contains static-sensitive devices that may be easily damaged, and proper handling and 
grounding is essential. Use ESD precautionary measures when installing systems or cards, and keep the 
parts and cards in antistatic packaging when not in use. If possible, use antistatic floorpads and workbench 
pads.

Improper handling and/or installation practices may VOID the warranty.

CAUTION  

When handling components, or when setting switch options, always use an antistatic 

wrist strap connected to a grounded equipment frame or chassis. 

If a wrist strap is not available, 

periodically touch an unpainted metal surface on the equipment. 

Never use a conductive tool, 

such as a screwdriver or a paper clip, to set switches.

Waste Electrical and Electronic Equipment (WEEE) Disposal

This symbol on Haivision products or packaging means that the product should not be 
disposed of with general waste. It is your responsibility to dispose of your waste equipment 
by handing it over to a designated recycling collection point. The correct disposal of your 
end-of-life equipment will help prevent potential negative consequences to the environ-
ment and human health. 

In accordance with the European Union (EU) WEEE Directive, Haivision products that fall 

within the scope of the WEEE, are labeled with the above symbol, and customers are encouraged to 
responsibly recycle their equipment at the time of disposal. Haivision also offers its customers the option 
of returning Haivision equipment to facilitate its environmentally sound disposal.

For more information, please visit our website at: 

http://www.haivision.com/environment

Содержание MB6






























Отзывы: