Haivision Makito, Руководство пользователя

Страница: 62 / 294

Managing the Encoder
Accessing the Encoder
Makito User’s Guide, v2.1.0, Issue 01 62
TIP
After you change the encoder IP Address, be sure to document it somewhere or label
the chassis. Otherwise if you do not know the current IP Address, you will need to reset
the Makito to its factory settings, which will return the unit to the default IP address (and
you will lose any saved configurations and settings). For more information, see “Resetting
the Encoder” on page 54.
Role-based Authorization
The Makito uses role-based authorization control to secure the Web Interface and CLI. As
of Version
2.1.0, administrators can create new accounts and thus allocate an account to
each user of the system.
The Makito provides three defined account roles to assign privileges to users:
Role Default
Username Default
Password Privileges
user public Read-only access to the system.
operator supervisor All rights to configure A/V and stream
settings and reboot the system.
Does not include rights to upgrade the
system, modify the network settings,
or manage accounts.
admin manager All access rights and Administrator
privileges.
The table below summarizes role-based access to functional modules:
Guest
Operator
Administrator
Functional Modules Guest Operator Administrator
Operation
Video Settings Read-only Yes Yes
Audio Settings Read-only Yes Yes
Metadata Settings Read-only Yes Yes
Stream Settings Read-only Yes Yes
RTSP Settings Read-only Yes Yes
Media Effects Read-only Yes Yes
Video Profiles Read-only Yes Yes
Configuration Files - Yes Yes