3
Technical data
Supply voltage (see
rating plate)
230 VAC 50/60 Hz
115 VAC 50/60 Hz
24 VDC
allowable tolerance
+/- 5%
24-32 VDC
switchable with mains selection switch
Fusing
160 mA medium lag
315 mA medium lag
1.6 A medium lag
Quiescent current in-
put
typically 45 mA
typically 90 mA
typically 60 mA
Type
IFC 24 in polyester mounting enclosure
Output data
24 solenoid valve outputs 24 VDC, output power
max. 24 W / 1 A
Output fuse 1.6 A very fast acting
13 − 24 outputs manually activatable with a step
switch.
Outputs are shielded by freewheeling diodes.
Pulse time
approx. 60 − 600 ms settable
Display by RED LED
Pause time
approx. 6 − 60 s settable
Display by GREEN LED
Secondary cleaning
Selectable 0 − 5 cycles, approx. 5 s pause time dur-
ing the secondary cleaning
Signalling by light-emitting diodes
RED: Lack of air, wire break
GREEN: Status message (active)
Message output
Status message, GREEN LED, potential-free make
contact (NO), contact load max.: I = 0.5 A, U =
230 VAC
Control input
F: Remote control input 24 VDC, YELLOW LED,
P: Input for pressure sensor, YELLOW LED
Current input approx. 15 mA
Supply voltage for external pickup
24 VDC, 50 mA max.
Enclosure material
Polyester, glass fibre reinforced
Colour
RAL 7000 (squirrel grey)
Installation
Wall-mounted
Degree of protection
IP65 to EN 60529
Dimensions ( L × W × H)
255 × 120 × 250 mm
Weight
4.8 kg
Cable entries
6 × M16, 4 × M20
Clamping areas of the cable entries
M16: 4.0 − 8.0 mm or 5.0 − 10 mm
M20: 6.5 − 12.0 mm or 10.0 − 14.0 mm
Connection cross-section
0.2 −2.5 mm
2
Maximum surface temperature
T
of the en-
closure (category 3D) at 40 °C ambient tem-
perature
80 °C
Allowable ambient temperature
Hazardous area Zone 22: Ta: -10 °C ... +40 °C
Outside the hazardous area: -20 °C ...+40 °C
3 | Technical data
6
Electronic solenoid valve control · V1.0 · 04/2022
Operation manual
