vario quick
Safety
6
Order h49 7144.907-333
2 Safety
2.1 Responsibility of the operator
The product is used in the commercial and industrial sector.
The operator of the product is therefore governed by the pro-
visions of Health & Safety at Work legislation.
As well as the safety notices in this manual, the area of use
of the product must also comply with locally applicable
safety, accident prevention and environmental protection
specifications as well as those in the manual for the machine
tool.
No modifications must be made to the product. The operator
is wholly and solely responsible for any resultant personal
injury and/or damage to materials.
2.2 Intended use
The product is only intended for installation in a CE-compli-
ant machine tool with a separating set of guards.
This product is intended for installation in a compatible
product with corresponding attachment geometry.
The product is only intended for the type of use described
in this manual [see »Use« chapter]. Furthermore, an ex-
tended form of use can be agreed contractually between
manufacturer and operator.
2.3 Particular hazards
The following section names residual risks resulting from the
installation of the product in a machine tool. In all cases, the
residual risks detected during a risk assessment of the ma-
chine tool need to be named by the operator.
Pay attention to the safety instructions named here, as well
as the warning notices in other chapters of these operating
instructions to reduce the risk of health hazards and to pre-
vent dangerous situations.
Sharp-edged parts
WARNING
Serious cut injuries caused by sharp-edged parts
and burrs!
All installation of individual parts must be per-
formed by skilled staff from the relevant specialist
field.
Also wear the following items of personal protec-
tive equipment, in addition to the basic equip-
ment:
