vario flex
Removal
42
Order h49 7144.907-333
10.3 Removal of the product
A
Gas pressure spring
B
Clamping nut
C
Ejector
C1 Clamping screws, ejector
D
Clamping ring
E
Adapter disc
1. As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
10.3.1 Removal of the product from the clamping device
INFORMATION
Installation / removal of the product is described in the
operating instructions for the clamping device.
In addition to these operating instructions, also read
and follow the operating instructions for the relevant
clamping device.
1. Remove the product.
