MANDO Adapt T211
Layout and function
Order h49 7144.907-333
27
4 Layout and function
4.1 Overview and brief description
1
Basic clamping device
2
Adaptation clamping de-
vice
3
Workpiece end-stop
4
Segmented clamping
bushing [clamping ele-
ment]
5
Tension bolt
The adaptation clamping device is intended to convert exter-
nal into internal stresses.
The adaptation clamping device sits directly on the basic
clamping device.
It does not need to be aligned.
The clamping element is mounted to the clamping device
with the tension bolt and the workpiece end-stop, and it
clamps the workpiece that is to be machined.
The workpiece end-stop is secured to the clamping device.
The clamping device functions on the pull-back principle.
When clamping, the clamping element performs an axial
movement towards the workpiece end-stop.
The mobile coupling draws the clamping element onto the
stationary taper.
This draws the workpiece firmly up against the stationary
workpiece end-stop.
4.2 Accessories required
4.2.1 Basic clamping device
The basic clamping device supports the adaptation clamping
device.
4.2.2 Segmented clamping bushing
The segmented clamping bushing is manufactured with a
customer-specified clamping diameter.
4.2.3 Workpiece end-stop
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
