Haier XS 4A4M4PB, Руководство пользователя

Страница: 36 / 52

36
If you want to cancel the delayed start
proceed as follows:

Open the door.
 Press and hold the "START/RESET"
button for at least 3 seconds. The display
will show
"RESET"
and beeps will sound.

The delayed start and the selected
programme will be cancelled. The name
of the programme will appear on the
display.
 At this point, if you want to start the
dishwasher, you will need to set the
desired programme again and select the
option buttons, if necessary.
WARNING LIGHTS ON
THE DISPLAY
When the " SALT " message appears on the
display or, where present, the relative light
comes on
, fill the tank (see chapter
"ADDING THE SALT" ).
When the " RINSE AID" message appears
on the display or, where present, the
relative light comes on
, fill the tank
(see chapter
"ADDING RINSE AID"
).
Indicates any fault in the inflow of water
between the tap and the dishwasher (see
"TROUBLESHOOTING AND WARRANTY" ).
DISHWASHER FUNCTIONS
While the washing program is running, a
floor light is projected onto the floor under
the dishwasher door. When the wash cycles
are started, the light stays on until the end
of the wash cycle.
To indicate the end of the wash cycle, the
floor light is activated intermittently for 10
sec.
The indication will not be visible if the
plinth panel is positioned forward or if
something is placed in front of the
information projector.
The light is not active when the
machine is in the delayed start or
pause condition.
FLOOR LIGHT
(only in models where present)
WATER SUPPLY CLOSED
INDICATOR LIGHT
If the RINSE AID level is set to 0, this
will never happen.
"NO RINSE AID" warning light
If the softener level is set to 0, this will
never happen (see chapter on setting
the softener).
"NO SALT" warning light
In the event of a power failure or
shutdown, the dishwasher stores the
time remaining before starting, which
will be resumed at the point where it
was interrupted as soon as the power
supply is restored or the machine is
switched on again.