Haier XS 4A4M4PB, Руководство пользователя

Страница: 26 / 52

26
5) When you have finished, refit the rotor
arms in the same position,
remembering to re-align the arrow and
screw into position (fig.5) .
6) Both the door lining and the tank lining
are in stainless steel; however, should
spots caused by oxidation occur, this is
probably due to a high level of iron salts
presents in the water.
7)
The spots can be removed with a mild
abrasive agent; never use chlorine
based materials, steel wool, etc.
After every wash it is essential to turn off
water supply and to switch off the machine
by pressing the ON/OFF button to the off
position.
If the machine is not going to be used for
some time, it is advisable to follow these
rules:
1. do an empty wash with detergent in
order to clean the machine of any
deposits;
2.
pull out the electric plug;
3. turn off the water tap;
4.
fill the rinse aid container;
5. Ieave the door ajar;
6. keep the inside of the machine clean;
7. If the machine is left in places where the
temperature is below 0°C any water left
inside the pipes may freeze. Wait until
the temperature rises above zero and
then wait for about 24 hours before.
WHEN CYCLE IS FINISHED
Do not use t ools that can deform the
spray head s .