Connection between the water inlet hose and the washer
1.
Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve
water absorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1.
Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1.
Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1.
Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
Description of operation button
5 Use the operation button
Í ° ¸ É Ô ï
Í ° ¸ É Ô ï
¸ É Ô ï Ä Ú Í â Í ° £ ¬ · À Ö ¹ Ï ¸ ¾ ú × Ì É ú
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Push and hold the water level button and spin button, then push down the power on/off button .The digitron displays .
You can continue setting desired washing procedures. After setting ,push down the start/pause button. The child lock
function is activated. all of the buttons are locked and cannot make selection .
Release the child lock function :push down water level button and spin button at the same time for more 2seconds .
After a beep sound ,the child lock function is released.
The function is intended for children safety and preventing the washing program from accidental changes by children.
Off
FIRST RINSE
SECOND RINSE
THIRD RINSE
MEMORY
BLANKET
CHILD
QUICK
STANDARD
COTTON
WOOL
TUB DRY
K
POWER
ON/OFF
START
PAUSE
DRYING
RESERVE
WATER
SOAK
WASH
RINSE
SPIN
WATER
VALUE
SET
DELAY
Indicator mode and meaning
Child lock function
Push the "POWER" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will switch
off the power automatically after 5 minutes.
POWER
ON/OFF
A "POWER" button
After the power is switched on, press it to start the machine
During working, push it to pause.
During pause, push this button to restart and go on working
START
PAUSE
B "START/PAUSE" button
Washing the relatively big and thick laundriesr
Washing for the woollen laundries,
STANDARD
Program
Application
Quick washing for normal laundries
under 2.5kg
BLANKET
Standard saving washing for normal laundries
QUICK
Washing for children laundries,
CHILD
The commom wash ,
the washing machine
will set to MEMORY program including
"wash, rinse,spin,water value "automatically
last time
MEMORY
Application
Program
WOOL
COTTON
Washing the cotton textiles
Avoid growing mildew on the outer tub and the
inner tub
TUB DRY
C "PROGRAM" button
10
PROGRAM
