Dismantle the lint filter:
Same as fig 1
put hand in place,
then push it down to dismantle.
Install the lint filter:
After cleaning the filter, insert the bottom
of the filter into the filter lid, then push the
top of the filter to install it(same as fig 3 ).
Clean the lint:
While the lint is wet, put it into water,
then clean it (same as fig 2 ).
The disposal of the lint filter
Filter lid
Using process
Using process
10 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise
it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The filter screen of the water inlet valve is
likely to be blocked by foreign materials
and influence the water inlet. Please clean
it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely
after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time (about 1 hour), then close the top lid.
The lint filter must be used during washing.
It must be cleaned in time after each using
Thinner
Petro
l
Alcohol