It is suggested to use foamless washing powder.
Haier Manual XPB76-113S Back
DRAIN
WASH-RINSE
DRAIN
SELECTOR
Figure 5
Please don’t use the washer in the environment below 0
°
C. If the washer is
below 0
°
C, the washer’s water inlet/draining system will be frozen and will
result in damaged of whole machine. If the washer has below 0
°
C, please
be sure to ensure that washer is placed under room temperatures for
2-4 hours and then use.
Figure 5
STRONG
4
3
Haier Warranty Terms & Conditions
High
Medium
Low
H
M
L
The new hose-sets supplied with the appliance are
to be used and that old hose-sets should not be reused.
Wash Timer
Water Inlet
Hanging Hook
Wash Lid
Water Inlet
select
Control
Panel
Spin
Timer
Drain
Hose
Spin
Lid
Filter
Water-fall Outlet
Pulsator
Cabined
Spin-dry
Inner Lid
Spin-dry
Basket
Base
Power
Cord
Insert water inlet pipe
towards wash side water
inlet of control panel.
WASH-RINSE
DRAIN
SELECTOR
STRONG
Wash/Soak Timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. It can increase
the service life of the timer)
Wash selector
(Gentle wash speed,
Normal wash speed
Strong wash speed)
Spin Timer
(to set to below 1
minute, first set to 2
minute then turn it back.
It can increase the
service life of the timer)
Drain Selector
After washing, the buzzer
will ring. Set the Drain
Selector at DRAIN.
Insert water inlet pipe towards spin side
water inlet of control panel. Fill water for
about 1 minute. If the water quantity filled
is too large, the water may flow out from
the wash tub side. Please twist the water
tab to limit the water filling.
