Haier XPB60-CS Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 20

Haier XPB60-CS Скачать руководство пользователя страница 4

2

Safety precautions

Please insert the power cord into
special receptacle with rated vol-
tage.Be sure to use single-phase
three pins receptacle.The earthing
terminal of the receptacle must be
earthed reliably.If possible,please
adopt electric leakage protector.

Please use a power point flat has
easy access. Be sure to pull the
plug out when there's power
failure, or the machine is being
moved, cleaned or when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the
technicians of an after-sale service department.
Keep the pin of the power plug clean.

Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.

Do not use water hotter than 50 C .

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Ventilation hole at
the bottom of the
washing machine

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plug in the
receptacle is loose, do not use the plug any
more.

Earth

«
...
2
3
4
5
6
...
»

Содержание XPB60-CS





















Отзывы:

Нет отзывов