Haier XPB60-CS Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 20

Haier XPB60-CS Скачать руководство пользователя страница 18

Trouble-shooting Answer to questions

(If there's break down, please pull out the power plug before
checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair.
If there are real breakdowns, please call the after-sale service
department of our company. Do not repair it by yourself.

Phenomena The reason

The machine does
not act.

Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign
materials?

Is the drain hose frozen?
Is the drain hose blocked by foreign
material?
Are there laundries falling to the outer
side of the spin tub?

The draining does
not work

Are there hair pin, coins or metal items
brought inside the tub?

Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer
side of the spin tub?
Are the laundries in spin tub too much?

It is the water remaining from in the factory
inspection of performance.

There may be some

waterflowing out of

the drain hose in the

first use of the

machine.

There's abnormal
sound and violent
vibration during
spinning

There's abnormal
sound during washing

16

«
...
16
17
18
19
20
»

Содержание XPB60-CS





















Отзывы:

Нет отзывов