Attach both inlet hoses to the
machine. The red end MUST
be attached to the machine, as
it has metric threading.
4.
Attach both hoses to the water
supply. Be sure that the
correct hose is on the correct
inlet valve. (Hot-Hot; Cold-Cold)
Tighten all connections to
prevent leaks, but do not over
tighten.
5.
With Adaptor
The U-bracket must be attached
to the hose to hold it in the
drain. It is recommended that
4-6 inches of hose should be
left to go into the pipe.
5.
Put the drain hose into the
drain pipe, securing it to make
sure that it cannot slip and
flood.
5.
4-6”
