background image

31-5000493   Rev. 4

15

For The Period Of:

GE Appliances Will Replace:

5 year limited parts 

warranty

From the date of the 

original purchase

This Standard Base. Limited Warranty covers all defects in workmanship or material for the 

mechanical and electrical parts (including the compressor) contained in the Product (“Defective 

Parts”) for a period of 5 years from the Date of Purchase. GE Appliances will provide new or 

refurbished parts, or a replacement for all or part of the unit, at its sole discretion, to your licensed 

HVAC technician installer. This warranty also covers all defects in workmanship or material for 

the unit controller for a period of 1 year. The remote controller is covered by 1-year accessory 

warranty. The ductless system is covered by Standard Base Limited Warranty. GE Appliances 

will provide a new or refurbished controller, at its sole discretion.

For the product models listed on Attachment 1 (the “Product”), this Standard Base Limited Warranty is provided to the 

Original Owner of the Product:

Limited Warranty

•   

Damage from improper service or installation.

•   

Damage in shipping.

•   

Defects other than manufacturing defects (i.e., other than 

workmanship or materials).

•   

Damage from misuse, abuse, accident, alteration, lack of proper 

care and/or regular maintenance, or incorrect electrical voltage 

or current.

•   

Damage resulting from floods, fires, wind, lightning, accidents 

or similar conditions.

•   

Product that was not installed or serviced by a licensed HVAC 

technician.

•   

Labor and related services for repair or installation of the 

Product.

•   

A product purchased from an unauthorized online retailer.

•   

Damage as a result of subjecting Product to an atmosphere 

with corrosives or high levels of particulates (such as soot, 

aerosols, fumes, grease).

•   

A Product sold and/or installed outside of the 50 United States, 

the District of Columbia, or Canada.

•   

Batteries for the controller and other accessories provided with 

the Product for installation (e.g., plastic hose).

•   

Normal maintenance, such as cleaning of coils, cleaning filters, 

and lubrication.

•   

For Product installed in non-owner occupied applications, 

Product that has not been maintained annually by a licensed 

HVAC technician (proof required).

•  Damage caused by a used or unapproved component or 

part by GE Appliances, a Haier company (e.g., a used and/or 

unapproved condenser / air handler). 

•  Component or parts are not provided by GE Appliances, a Haier 

Company

•  Product that has been moved from its original installation to a 

new residence or building.

THIS WARRANTY DOES NOT COVER

Owner occupied: The “Original Owner” of this product means the original owner (and his or her spouse) of the residence 

where the Product was originally installed. Non-owner occupied: The “Original Owner” of the Product means the original 

owner of the building where the Product was originally installed, and for new construction, the purchaser of the building 

from the builder. “Non-owner occupied” is defined as a a) single family or multi-family non-owner-occupied residential 

building, or b) non-industrial commercial application, (such as office buildings, retail establishments, hotels/motels), but for 

non-owner-occupied Original Owners, this limited warranty requires that the product be installed and maintained annually 

by a licensed HVAC technician (proof of annual maintenance is required). Subject to the law of the state or province 

where the Product is installed, the remainder of this Standard Base Warranty is transferable to subsequent owners of the 

residence or building.

WHO IS COVERED

The “Date of Purchase” is the date that the original installation is complete and all product start-up procedures have been 

properly completed and verified by the installer’s invoice. Registration is strongly recommended. If the installation date 

cannot be verified, then the Date of Purchase will be sixty (60) days after the manufacture date, as determined by the 

Product’s serial number. You should keep and be able to provide your original sales receipt from the installer as proof of 

the Date of Purchase. For new construction, the Date of Purchase will be the date of purchase of the residence by the 

Owner from the builder.

WHAT IS THE DATE OF PURCHASE

Contact your licensed HVAC technician installer. All installation and service must be performed by a licensed HVAC technician.

Failure to use a licensed HVAC technician for installation of this Product voids all warranty on this Product.

HOW CAN YOU GET SERVICE

The following components are not covered by this warranty: cabinets, cabinet pieces, air filters, driers, refrigerant, refrigerant line sets, 

belts, wiring, fuses, oil nozzles, unit accessories and any parts not affecting unit operation.  

EXCLUDED COMPONENTS

Содержание USYM09UCDSA

















Отзывы: