Haier TP180JEF, Руководство по установке и эксплуатации

Страница: 5 / 16

The product uses high-efficient flat collectors fixed on the aluminum frame.
1.Select a suitable position for the solar collectors.
2.Determine the location of the collector rail, and hook the collector straps to the collector rail.
3.Remove the tiles from the place reserved for the collector on the roof, then fix the collector
strap to the rafters, using self-drilling screws or stainless steel nails (or with embedded
expansion bolts).
4.Position the solar collectors in the correct configuration with the lower ends seated in the
collector rail.
5.For multiple solar collector installations, couple the solar collectors together using the
collector unions.
6.Ensure the solar collectors are well seated in the collector rail.
Note
：
Ensure the glass on your solar collectors is free of dust, salt spray or any other matter, which
may reduce the effectiveness of the solar collectors. If the collector glass becomes dirty, hose
down or if the solar collectors are accessible, wash the collector glass with water and a soft
brush when the solar collectors are cool.
If your system is for flat roof, please refer to the Exploded View of System for flat
page 11 to 14.
roof on
Collector rail
Collector strap
Solar collector
Collector strap
Collector rail
Collector rail
Tiles
Collector clamp
5
Installation Introduction
Installation of Solar Collector